TEL. 022-217-5298 (代表)
〒980-8577 宮城県仙台市青葉区片平 2-1-1
システムエネルギー保全研究分野に配属になると、以下のような研究課題に取り組みます。
D3 | 多層パイプの損傷評価のための電磁超音波センサ Electromagnetic Acoustic Transducer for Multilayered Pipe Damage Quantitative Evaluation of Wall Thinning by Pulsed ECT パルス渦電流試験法による配管減肉の定量的評価 |
D2 | ダイヤモンドライクカーボンの適用による宇宙用液体潤滑剤の真空中境界潤滑特性の向上 Improvement of Boundary Lubrication Properties of Space Liquid Lubricants using Diamond-like Carbon Coatings |
平成22年度 | 平滑な表面に形成した気相成長ダイヤモンドの付着性に関する研究 A Study of the adhesive ability of CVD diamond on smooth surface |
平成18年度 | センサ・デバイス応用のための金属を含むダイヤモンドライクカーボン膜に関する研究 A study on metal-containing diamond-like carbon films for sensor/device applications |
平成17年度 | 生体軟組織の熱・力学特性を考慮した形状記憶合金人工括約筋の機能性評価に関する研究 Evaluation of an Artificial Sphincter Using Shape Memory Alloys and the Mechanical Interaction Between the Artificial Sphincter and Intestine |
平成13年 | Phase transition and magnetostrains in ferromagnetic shape memory alloys
Ni2+xMnxGa 時期形状記憶合金Ni2+xMnxGaの相変態と磁歪 |
平成11年 | 渦電流探傷試験におけるき裂形状同定に関する研究 Crack Shape Reconstruction in Eddy Current Testing |
M2 | 高速磁化過程に着目した非線形渦電流法による高クロム鋼のクリープ損傷に伴う組織評価 Evaluation of Microstructure of High-Cr Ferritic Steel with Creep damage by Non-linear Eddy Current Testing Method ステンレス上にコーティングした多結晶ダイヤモンドの密着性に対する金属中間層の影響評価 Evaluation of Adhesive Properties on a Metallic Interlayer between a Polycrystalline Diamond Coating and a Stainless Steel Substrate |
M1 | 渦電流試験法によるボイラーチューブのニッケル基溶射被膜の厚さ評価 Thickness Evaluation of Ni-based Spray Coating on Boiler Tubes by Eddy Current Testing |
平成22年度 | 渦電流探傷試験による応力腐食割れの定量的評価のための電磁応答モデルに関する研究 Electromagnetic Modeling of Stress Corrosion Crackings for Quantitative Evaluation based on Eddy Current Testing 金属ナノクラスタを含むDLC膜の創成とひずみセンサとしての機能性評価 Investigation of Electrical Conductive Properties of Metal-containing Amorphous Carbon Coatings for Strain Sensor Application 無潤滑条件下における気相合成多結晶ダイヤモンド膜の低摩擦特性評価 Evaluation of Low Friction Properties of CVD Poly-crystalline Diamond Film in no Lubrication Condition |
平成21年度 | 原子炉構造材料の応力腐食割れ感受性に関する微視的組織の電磁非破壊評価 Evaluation of the Microstructures Related to the Susceptibility to Stress Corrosion Cracking in the Structural Materials of Nuclear Power Reactors Based on Electromagnetic Nondestructive Evaluation Method 形状記憶合金へのDLCコーティングと金属添加による密着性の改善 Deposition of DLC Coatings on Shape Memory Alloy and Improvements of the Adhesion Strength by Metal Addition |
平成20年度 | 非線形電磁応答に基づく磁性構造材料の劣化評価 Deterioration Evaluation of Structural Materials Based on Magnetic Nonlinear Response Me-DLC多層膜の機械強度特性の向上を目指した境界層のナノ構造制御 Controlling the boundary nano-structure in Me-DLC coatings for the improvement of mechanical performance 非周期微細溝構造を有する気相合成ダイヤモンドの摩擦・摩耗特性 Friction wear characteristic of CVD diamond films with fine surface structure 超音波を用いた分散型複合材料の機械特性評価 Evaluation of Mechanical Properties of Distributed Composites |
平成19年度 | 形状記憶合金を用いた機能性医療機械要素の研究 Study of Functional Medical Machine Elements using Shape Memory Alloy 応力腐食割れのモデリングと電磁非破壊評価に関する研究 Quantitative Evaluation of Stress Corrosion Cracking Based on Eddy Current Method 電磁現象を用いた構造ヘルスモニタリングの基礎研究 Fundamental Research of Structural Health Monitoring using Electromagnetic Phenomena |
平成18年度 | 構造健全性モニタリングのための電磁超音波・渦電流複合センサの開発 Development of EMAT-EC Multi-sensor for the Improvement of Structural Health Monitoring 薄膜センサ材としてのMe-C:H膜の電気磁気的特性の評価 Evaluation of the electrical and magnetic properties of Me-C:H films 気相合成ダイヤモンド膜における低摩擦摺動現象の環境依存性評価 Research of Environmental Dependency for Low Friction Properties of CVD Diamond Film 磁性構造材料の電磁現象に基づく材質と劣化の非破壊評価 |
平成17年度 | マルチスケール電磁アプローチによる磁性構造材の材料評価 Material Evaluation of Magnetic Structural Material based on Multi-scale Electromagnetic Approach 形状記憶合金を用いた人工食道の蠕動運動機構の提案 Proposal of Peristaltic Actuator Component for Artificial Esophagus using Shape Memory Alloy |
平成16年度 | 渦電流を用いた構造健全性モニタリング Structural Health Monitoring based on Eddy Current Technique 電磁現象を用いた鋳造品の組織評価 Matrix Evaluation of Cast Iron based on Electromagnetic Phenomenon 気相合成ダイヤモンドを用いた固体潤滑特性評価 Friction Properties of Partly Polished CVD Diamond |
2010/6/1-2010/8/27 | Development of metal-amorphous carbon nanocomposite coating for biomedical application | Ecole Centrale de Lyon, France |
平成22年度 | 炭化珪素を含有するDLC複合膜の耐摩耗性評価 Evaluation of Tribological Behavior of Diamond-like carbon Containing Silicon Carbide Grains 銀を含む非晶質炭素膜の作製および導電性摺動要素としての評価 Tribological Behavior and Electrical Conductive Properties of Diamond-like carbon Containing Metallic Grains 渦電流試験法によるボイラーチューブのニッケル基溶射被膜の厚さ評価 Thickness Evaluation of Ni-based Spray Coating on Boiler Tubes by Eddy Current Testing |
平成21年度 | 磁気光学効果に基づく磁性構造材料の劣化診断 Nondestructive Evaluation of Degradation of Magnetic Structural Materials Based on Kerr Effect |
平成20年度 | 電磁超音波-渦電流複合プローブを用いた鋳鉄の非破壊材質評価 Materials Characterization of Cast Irons with an EMAT/EC Dual Probe 歪みセンサへの応用を目指した金属を含む非晶質炭素膜の特性評価 Evaluation of strain sensitivity in metal-containing amorphous carbon coating for strain sensor applications 汎用鋼材への部分研磨多結晶ダイヤモンド成膜技術開発 Development of the deposition technique of partly polished diamond coatings on general steel |
平成19年度 | 電磁非破壊評価法を用いたNi基合金の鋭敏化評価 Evaluation of Sensitization of Ni Based Alloy using Electromagnetic Nondestructive Evaluation 形状記憶合金へのDLCコーティングと金属添加による密着性の改善 Deposition of DLC coatings on Shape Memory Alloy and Improvements of the Adhesion Strength by Metal Addition |
平成18年度 | 非破壊的手法を用いた金属材料の残留応力測定の検討 Residual stress assessment in the treated surface layer using electromagnetic technique 高分子材料上に成膜したMe-DLC多層膜の電気・機械的特性 Deposition and properties evaluation of Me-DLC films on polymer substrate 気相合成ダイヤモンドの金属に対する摩擦・摩耗の表面粗さ依存性 Evaluation of the influence on the surface microstructures to the friction properties between metal and diamond films |
平成17年度 | 形状記憶合金を用いたマニピュレータのための制御システムの検討 柔らかい基板への非晶質炭素膜の成膜とその密着性及び膜構造の評価 電磁現象を用いた神経の刺激と反応 |
平成16年度 | ロケットエンジン熱要素部における潜在的損傷部位の発見方法に関する研究 Mining Methodology of Potential Damage Portion of Thermal Elements in Rocket Engine Systems 磁性金属を含むDLC薄膜の強磁場下における物性評価 Properties of Diamond-like Carbon Containing Magnetic Metal in High Magnetic Field 渦電流探傷試験におけるリフトオフ同時計測手法の検討 Simultaneous Acquisition of Lift-off Information in Eddy Current Testing |
平成22年度 | Evaluation of Tribological Behavior of Diamond-like carbon Containing Silicon
Carbide Grains Tribological Behavior and Electrical Conductive Properties of Diamond-like carbon Containing Metallic Grains Thickness Evaluation of Ni-based Spray Coating on Boiler Tubes by Eddy Current Testing |
平成21年度 | DLC Films Fabricated by Plasma Immersion Ion Implantation and Deposition on the NiTi Alloys for Improving Their Corrosion Resistance and Biocompatibility Tribological Properties of Nanocrystalline Diamond films Modelling the Effect of Graphite Morphology on the Modulus of Elasticity in Cast Irons |
平成20年度 | Observation of the failure mechanisms for diamond-like carbon films on stainless steel under tensile loading Inverted and Forward Preisach Models for Numerical Analysis of Electromagnetic Field Problems |
平成19年度 | Nondestructive Indication of Plastic Deformation of Cold-rolled Stainless
Steel by Magnetic Minor Hysteresis Loop Measurement. Tribological Behavior of Diamond Coatings Sliding against Steel: An Experimental and Numerical Approach Strain Sensitivity of Nickel-Containing Amorphous Hydrogenated Carbon (Ni:a-C:H) Thin Films Prepared by r.f. Sputtering Using Substrate Bias Conditions |
平成18年度 | Opportunities and challenges for nondestructive residual stress assessment The design of shape memory alloy actuators and their applications |
平成17年度 | Quantitative NDE of diamond film adhesion using an ultrasonic angle-beam technique Structure and magnetic properties of facing-target sputtered Co-C granular films An over view of nitinol medical applications |
平成16年度 | Development of a shape memory alloy actuated biomimetic vehicle MWM eddy current sensors for monitoring of crack initiation and growth during fatigue tests and in service A study of the tribological behaviour of three carbon-based coatings, tested in air, water and oil environments at high loads |
平成22年度 | 高感度磁気センサを用いて微小金属異物を検出してみよう 薄膜センサを作製して構造材の振動を測定してみよう 薄膜ダイヤモンドによる超低摩擦現象 |
平成21年度 | 薄くて小さい歪みセンサを作ってみよう 多結晶ダイヤモンドによる超低摩擦現象 超音波と渦電流で疲労き裂を見てみよう |
平成20年度 | ナノスケールの滑らかな表面の計測 材料の磁化をいろいろなスケールで見てみよう |
平成19年度 | ダイヤモンドライクカーボンにおける表面構造の評価 電磁超音波-渦電流マルチセンサによる疲労き裂の評価 |
平成18年度 | 気相合成ダイヤモンド膜及びダイヤモンドライクカーボン膜の微細構造評価 超音波による構造物のヘルスモニタリング ナノクラスター金属を含むダイヤモンドライクカーボン膜のセンサ機能評価 |
平成17年度 | 原子間力顕微鏡による気相合成ダイヤモンド薄膜の表面観察 形状記憶合金を用いた医療器具用アクチュエータの評価 |
平成16年度 | 超音波で金属の微小き裂を測ってみよう 誘電率を測って食品の不均質構造を調べてみよう いろいろな材料の滑りをはかってみよう |
平成21年度 | 機械と人のQOL(Quality of Life) |
〒980-8577
宮城県仙台市青葉区片平 2-1-1
東北大学 流体科学研究所
TEL 022-217-5298(代表)
FAX 022-217-5298