2013年 (論文：平成25年1月～平成25年12月，会議・学会：平成25年4月～平成26年3月)
学術雑誌・学会誌に掲載された原著論文Boyko Stoimenov, Vincent Fridrici, Philippe Kapsa, Hiroyuki Kosukegawa, Makoto Ohta
Bioengineering Materials and Conditions for Obtaining Low Friction with PVA Hydrogels
[Tribology Online, 8, 1 (2013) 140-152. ISSN 1881-2198 DOI 10.2474/trol.8.140
Manuscript received 18 March 2012; accepted 12 November 2012; published 31 January 2013]
PDF
Noriko Tomita, Mohammad M. Mohammad, David J. Niedzwiecki, Makoto Ohta, Liviu Movileanu
Does the lipid environment impact the open-state conductance of an engineered β-barrel protein nanopore?
[Biochimica et Biophysica Acta 1828 (2013) 1057–1065, Accepted 4 December 2012, Available online 11 December 2012]
PDF
Lei Liu, Kenichi Funamoto, Kei Ozawa, Makoto Ohta, Toshiyuki Hayase, Masafumi Ogasawara
In vitro study of ultrasound radiation force-driven twinkling sign using PVA-H gel and glass beads tissue-mimicking phantom
[J Med Ultrasonics DOI 10.1007/s10396-012-0429-9, Received: 13 May 2012, Accepted: 13 December 2012]
PDF
Hiroyuki Kosukegawa, Vincent Fridrici, Philippe Kapsa, Yuji Sutou, Koshi Adachi, Makoto Ohta
Friction Properties of Medical Metallic Alloys on Soft Tissue–Mimicking Poly(Vinyl Alcohol) Hydrogel Biomodel
[Springer Science+Business Media New York 2013, Received: 4 October 2012 / Accepted: 21 May 2013]
PDF
Ding Ma, Travis M.Dumont, Hiroyuki Kosukegawa, Makoto Ohta, Xinjian Yang, Adnan H.Siddiqui, Hui Meng
High Fidelity Virtual Stenting (HiFiVS) for Intracranial Aneurysm Flow Diversion: In Vitro and In Silico
[Annals of Biomedical Engineering (2013) DOI: 10.1007/s10439-013-0808-4, Received: 8 December 2012 / Accepted: 5 April 2013]
PDF
Chaoyang Shi, Masahiro Kojima, Hitomi Anzai, Carlos Tercero, Seiichi Ikeda, Makoto Ohta, Toshio Fukuda, Fumihito Arai, Zoran Najdovski, Makoto Negoro, Keiko Irie
In-vitro Strain Measurement in Cerebral Aneurysm Models for Cyber-Physical Diagnostic
[International Journal of Medical Robotics and Computer Assisted Surgery, Accepted: 21 December 2012]
PDF
Yasutomo Shimizu, Ashkan Javadzadegan, Toshiyuki Hayase, Makoto Ohta
Flow observations in elastic stenosis biomodel with comparison to rigid-like model
[Technology and Health Care, 2013;21(4):305-14, 2013]
PDF
Ashkan Javadzadegan, Yasutomo Shimizu, Masud Behnia, Makoto Ohta
Correlation between Reynolds number and eccentricity effect in stenosed artery models
[Technology and Health Care 21 (2013) 357-367 357 DOI 10.3233/THC-130736, Received: 16 March 2013, Accepted: 12 April 2013]
PDF
Shin-ichiro Sugiyama, Kuniyasu Niizuma, Toshio Nakayama, Hiroaki Shimizu, Hidenori Endo, Takashi Inoue, Miki Fujimura, Makoto Ohta, Akira Takahashi, Teiji Tominaga
Relative Residence Time Prolongation in Intracranial Aneurysms: A Possible Association With Atherosclerosis
[Neurosurgery 73:767–776, 2013, DOI: 10.1227/NEU.0000000000000096, Received:27 September 2012, Accepted:10 July 2013, Published Online:16 July 2013]
PDF
Noriko Tomita, Liviu Movileanu, Stephan Wilkens and Makoto Ohta
Microbial Pore-Forming Protein Properties Depended on Lipid Environment
[NIH-Tohoku UNiversity JSPS Symposium, Sendai, Japan, May, 9-10, 2013]
PDF
Hitomi Anzai, Jean-Luc Falcone, Bastien Chopard, Makoto Ohta
Application of optimization for design of intracranial stent with blood flow reduction as objective function
[World Congress on Structural and Multidisciplinary Optimization, Florida, USA, May 19-24, 2013]
PDF1
PDF2
Ashkan Javadzadegan, Yasutomo Shimizu, Masud Behnia, Makoto Ohta
Correlation between Reynolds number and stenosis morphology in eccentric and concentric artery models
[PIV 2013 Conference, Delft, Nederland, July 1-3, 2013]
PDF
Yasutomo Shimizu, Masanori Kuze, Ashkan Javadzadegan, Masud Behnia, Makoto Ohta
Comparison of flow patterns around stenotic area in elastic PVA-H model and in rigid-like silicone model
[PIV 2013 Conference, Delft, Nederland, July 1-3, 2013]
PDF
Sho Matsumoto, Han Xiaobo, Makoto Ohta, Noriko Tomita
Density change of smooth muscle cells in co-culture model under shear stress with spatial gradient related to the development of cerebral aneurysm
[The EMBO meeting 2013, Amsterdam, Netherlands, September 21-24, 2013]
PDF
Noriko Tomita, Liviu Movileanu, Makoto Ohta
Electrophysiological properties of engineered FhuA ΔC/Δ4L protein nanopore affected by lipid bilayer environment
[The EMBO meeting 2013, Amsterdam, Netherlands, September 21-24, 2013]
PDF
Toshio Nakayama, Makoto Ohta
Classification of flow pattern in neck based considering the parent artery curves and stent implantation
[ICS 2013, Buenos Aires, Argentina, November 13-14, 2013]
PDF
Yuuki Yoshida, Hitomi Anzai, Makoto Ohta
Optimization of stent design to increase the porosity
[ICS 2013, Buenos Aires, Argentina, November 13-14, 2013]
PDF
Toshio Nakayama, Shin-ichiro Sugiyama, Makoto Ohta
Classification of blood flow in cerebral aneurysm considering the parent artery curves
[ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, USA, November 15-21, 2013]
PDF
Kaihong Yu, Tetsui Yamashita, Shigeaki Shingyochi, Kazuo Matsumoto, Makoto Ohta
PIV ANALYSIS FOR FLOW PATTERN AROUND ABLATION CATHETER TO OBSERVE THE FLOW EFFECT ON ELECTRODE
[ASME 2013 International Mechanical Engineering Congress & Exposition, San Diego, USA, November 15-21, 2013]
PDF
Hiroyuki Kosukegawa, Vincent Fridrici, Emmanuelle Laurenceau, Makoto Ohta, Philippe Kapsa
Friction of Medical Materials on PVA Hydrogel in Physiological Lubrication
[World Tribology Congress 2013, Torino, Italy, September 8-13, 2013]
PDF
Kaihong Yu, Tetsui Yamanaka, Shigeaki Shigyochi, Makoto Ohta
The Effect of Vibration of Ablation Catheter on the Temperature of the Electrode
[The 10th ICFD, Sendai, Japan, November 25-27, 2013]
PDF
SLIDE
POSTER
Sho Matsumoto, Han Xiaobo, Hisatoshi Kobayashi, Noriko Tomita, Makoto Ohta
Influence of Ni-Ti Wire under the Shear Stress Environment on Endothelialization
[The 10th ICFD, Sendai, Japan, November 25-27, 2013]
PDF
SLIDE
Masashi Ohtake, Kei Ozawa, Ken Nakajima, Makoto Ohta
Development of Visualization System for Injection Molding by using PVA
[The 10th ICFD, Sendai, Japan, November 25-27, 2013]
PDF
SLIDE
Shin-ichiro Sugiyama, Toshio Nakayama, Kenichi Funamoto, Daichi Suzuki, Kuniyasu Niizuma, Makoto Ohta, Teiji Tominaga
Stagnant Blood Flow in Intracranial Aneurysms: A Possible Association with Atherosclerosis
[The 10th ICFD, Sendai, Japan, November 25-27, 2013]
PDF
Noriko Tomita, Liviu Movileanu, Makoto Ohta
Membrane Channel Dynamics Depended on Lipid Environment
[The 13th International Symposium on Advanced Fluid Information(AFI-2013), Sendai, Japan, November 25-27, 2013]
PDF
SLIDE
Noriko Tomita, Stephan Wilkens, Liviu Movileanu, Makoto Ohta
Analysis of Relationship between Lipid Environment and Protein Nanopore Properties
-Toward Creation of Red Blood Cell Model with Various Membrane Strength-
[The 10th ICFD, Sendai, Japan, November 25-27, 2013]
SLIDE
Masashi Ohtake, Kei Ozawa, Makoto Ohta
Observation of filling process in injection molding for fabrication of bone biomodel
[The 15th International Conference on Biomedical Engineering (ICBME) , Singapore, December 4-7, 2013]
PDF
Y.J.Li, H.Anzai, T.Nakayama, Y.Shimizu, Y.Miura, A.K.Qiao M.Ohta
Hemodynamic Numerical Simulation in Artery Complicated with both Stenosis and Aneurysm in Different Shape and Position
[The 5th Asia Pacific Congress on Computational Mechanics (APCOM2013), Singapore, December 11-14, 2013]
PDF
M.Z.Zhang, H.Anzai, Y.J.Liu, M.Ohta
A Study on Multiscale Model in the presence of Systemic-to-Pulmonary Shunt utilizing LBM-LPM
[The 5th Asia Pacific Congress on Computational Mechanics (APCOM2013), Singapore, December 11-14, 2013]
PDF
K.Takashima, S.Tsuzuki, M.Umetani, K.Yoshinaka, Y.Hoshino, M.Ohta, K.Mori
Guidewire Simulator for Intravacular Surgery (Comparison between Simulation and Experimental Results using Blood Vessel Model)
[2013 UPM-Kyutech Symposium of Applied Engineering and Sciences (UKSAES2013), University Putra, Malaysia, September 30 - Octorber 1 2013]
PDF
Makoto Ohta, Kei Ozawa, Vincent Fridrici, Philippe Kapsa
Research of Friction and Drilling on Bio-composite Model
[the 13th International Symposium on Advanced Fluid Information(AFI-2013), pp. 78-79, November 25-27, 2013]
PDF
Makoto Ohta, Bastien Chopard, Hitomi Anzai
Development of a Program for Blood flow and Cell Behaviors Based on LBM Method
[the 13th International Symposium on Advanced Fluid Information(AFI-2013), pp.80-81, November 25-27, 2013]
PDF
Makoto Ohta, Liviu Movileanu, Noriko Tomita
Channel Properties of Membrane Proteins on Lipid Bilayers
[the 13th International Symposium on Advanced Fluid Information(AFI-2013), pp.82-83, November 25-27, 2013]
PDF
Shin-ichiro Sugiyama, Toshio Nakayama, Makoto Ohta, Teiji Tominaga
Hemodynamic Analysis of Sidewall Type Intracranial Aneurysms
[the 13th International Symposium on Advanced Fluid Information(AFI-2013), pp.82-83, November 25-27, 2013]
PDF
Xiaobo Han，坂元 尚哉，冨田 典子，Meng Hui，佐藤 正明，太田 信
せん断応力を負荷した共存培養モデル内の血管平滑筋細胞のMMPの産生量の変化
[日本機械学会2013年度年次大会, 岡山, September 8-11, 2013]
于 凱鴻，山下 哲以，新行内 成晃，太田 信
アブレーションカテーテルの電極温度評価用システムの開発
[第26回バイオエンジニアリング講演会, 仙台, January 11-12, 2013]
PDF
Makoto Ohta, Hitomi Anzai, Han Xiaobo
Optimization of blood flow for intracranial stent
[International Workshop on Flow Dynamics related to Energy, Aerospace and Material Processing KTH, Stockholm, Sweden, September 10-11, 2013]
PDF
Makoto Ohta. Hitomi Anzai, Toshio Nakayama, Xiaobo Han, Noriko Tomita
Optimized Stent
[The 10th ICFD, Sendai, Japan, November 25-27, 2013]
PDF
冨田 典子
平面脂質膜多様化システムを利用した脂質依存型膜チャネルタンパク質の動態解析
[第9回 流体科学におけるバイオ・医療に関する講演会, Sendai, July 24, 2013]
太田 信
外科用インプラント並びにこれに関連する器具及び計装装置の検査等に用いる力学的安全性評価用模擬骨の国際標準化
[「ISO/TC150（外科用インプラント）とバイオセラミックスの国際標準化の状況」の講演会, Tokyo, January 28, 2014]
PDF
融合計算医工学研究分野・生体流動ダイナミクス研究分野
体の流れをたいけん！
[学都「仙台・宮城」サイエンス・デイ2013, Sendai, July 21, 2013]
PDF
Hitomi Anzai
Design Optimization of Intracranial Stent Towards the Advanced Design of Medical Devices
[The international Conference for High Performance Computing, Networking, Storage and Analysis]
PDF
冨田 典子
膜孔（まくこう）タンパク質の形と働き
[東北大学オープンキャンパス2013 "ランチタイム女子高生 by 理工農若手女子研究者", Sendai, July 31, 2013]
井川 修（日本医科大学多摩永山病院 内科・循環器内科）
心臓構造の特殊性
[第１０回 流体科学におけるバイオ・医療に関する講演会, 主催：東北大学流体科学研究所ライフサイエンスクラスター,
共催：日本機械学会バイオエンジニアリング部門 制御と情報－生体への応用研究会 JMS, Sendai, December 13, 2013]
PDF
安西 眸
血流低減のためのステント形状探索に関する研究
[産業技術総合研究所ライフサイエンス研究分野治療技術支援グループ研究セミナー, December 18, 2013]
PDF
Hitomi Anzai, Makoto Ohta
Introduction of Design Optimization for Intracranial Stent
[2nd Core-to-Core Workshop "Japan-China Joint Workshop on Bio, Material and Flow Dynamics", Sendai, Japan, February 27, 2014]
PDF
Kaihong Yu, Makoto Ohta
The Effect of Vibration Ablation Catheter on the Temperature of the Electrode under 0.1m/s Flow
[2014 ElyT lab Workshop, Frejus - St Raphael, France, February 19-21, 2014]
PDF
Mingzi Zhang, Hitomi Anzai, Makoto Ohta
Model Study of Single Ventricular Heart Syndrome and its Treatment
[2014 ElyT lab Workshop, Frejus - St Raphael, France, February 19-21, 2014]
PDF
Yujie Li, Hitomi Anzai, Toshio Nakayama, Makoto Ohta
Discussions of pressure distribution in artery with stenosis and aneurysm
[2014 ElyT lab Workshop, Frejus - St Raphael, France, February 19-21, 2014]
PDF