2014
Original papers published in scholarly journals and academic journalsHitomi Anzai, Jean-Luc Falcone, Bastien Chopard, Toshiyuki Hayase, Makoto Ohta
Optimization of Strut Placement in Flow Diverter Stents for Four Different Aneurysm Configurations
[Journal of Biomechanical Engineering, Vol. 136, Issue 6, p. 061006, 2014.]
PDF
Hitomi Anzai, Bastien Chopard, Makoto Ohta
Combinational optimization of strut placement for intracranial stent using a realistic aneurysm
[Journal of Flow Control, Measurement & Visualization, Volume 2, Number 2, pp. 66-76, 2014.]
PDF
Yujie Li, Hitomi Anzai, Toshio Nakayama, Yasutomo Shimizu, Yukihisa Miura, Aike Qiao and Makoto Ohta
Simulation of hemodynamics in artery with aneurysm and stenosis with different geometric configuration
[Journal of Biomechanical Science and Engineering, Recieved 12 March 2013, Released 3 March 2014.]
PDF
Yu Chang Ho, Makoto Ohta, Kwon Tae Kyu
Study of Parameters for Evaluating the Pushability of Interventional Devices Using Box-shaped Blood Vessel Biomodels Made of PVA-H or Silicone
[BIO-MEDICAL MATERIALS AND ENGINEERING, Volume 24, Number 1, pp. 961-968, 2014.]
PDF
Futoshi MORI, Sho HANIDA, Makoto OHTA, Teruo MATSUZAWA
Effect of Parent Artery Expansion by Stent Placement in Cerebral Aneurysms
[Tech & Health care, 2014 Jan 1;22(2):209-23]
PDF
Hiroyuki Kosukegawa, Vincent Fridrici, Emmanuelle Laurenceau, Philippe Kapsa, Makoto Ohta
Friction of 316L Stainless Steel on Soft-tissue-like Poly (vinyl alcohol) Hydrogel in Physiological Liquid
[Tribology International, accepted 2014, Volume 82, Part B, February 2015, Pages 407–414]
PDF
Dr. Salvatore Cito (Corresponding Author), Arjan Geers, MS; Pilar Arroyo, PhD; Virginia Palero, PhD;
Jordi Pallarès, PhD; Anton Vernet, PhD; Jordi Blasco, PhD; Luiss San Roman, PhD; Wenyu Fu, PhD; Aike Qiao, PhD;
Gabor Janiga, PhD; Yukihisa Miura, MS; Makoto Ohta, PhD; Mariana Mendina, MS; Gabriel Usera, PhD; Alejandro F. Frangi, PhD
Accuracy and Reproducibility of Patient Specific Hemodynamic Models of Stented Intracranial Aneurysm: Results of the Virtual Intracranial Stenting Challenge 2011
[Annals of Biomedical Engineering, 2014, accepted, vol. 43, No.1 Jan 2015, pp. 154-167 .]
Kazuto Takashima, Shotaro Tsuzuki, Atomu Ooike, Kiyoshi Yoshinaka, Kaihong Yu, Makoto Ohta, Koji Mori
Numerical analysis and experimental observation of guidewire motion in a blood vessel model
[Med Eng Phys. 2014 Dec;36(12):1672-83. doi: 10.1016/j.medengphy.2014.09.012. Epub 2014 Oct 5.]
PDF
Futoshi MORI, Makoto OHTA, Teruo MATSUZAWA
Changes in Blood Flow due to Stented Parent Artery Expansion in an Intracranial Aneurysm
[Technol Health Care. 2015 Jan 1;23(1):9-21. doi: 10.3233/THC-140871.]
PDF
Hitomi Anzai, Yuuki Yoshida, Makoto Ohta
Optimization of stent design for intracranial aneurysm
[The Fourth Japan-Switzerland Workshop on Biomechamics (JSB2014), Shima, Japan, September 1-4, 2014]
PDF
Mingzi Zhang, Hitomi Anzai, Bastien Chopard, Makoto Ohta
n Optimization Method of FD Stent for Cerebral Aneurysm facing tne Stent Design and Manufacturing Needs
[The Fourth Japan-Switzerland Workshop on Biomechamics (JSB2014), Shima, Japan, September 1-4, 2014]
PDF
Makoto Ohta, Sho Matsumoto, Xiaobo Han, Mingzi Zhang, Yujie Li, Kaihong Yu, Hitomi Anzai
Development of Image Guided Minimal Invasive Treatments
[The Fourth Japan-Switzerland Workshop on Biomechamics (JSB2014), Shima, Japan, September 1-4, 2014]
PDF
Mingzi Zhang, Hitomi Anzai, Makoto Ohta
Manufacture-oriented Struts Structure Optimization of Flow Diverter for Intracranial Aneurysm
[7th World Congress of Biomechanics (WCB2014), Boston, Massachusetts, July 6-11, 2014]
PDF
Kaihong Yu, Tetsui Yamashita, Shigeaki Shingyochi, Makoto Ohta
The Effect of Contact Force on Electrode Temperature and Internal Tissue Temperature during Ablation with a Vibrating Catheter
[11th International Conference on Flow Dynamics (ICFD2014), Sendai, Oct. 8-10, 2014]
PDF
Mingzi Zhang, Hitomi Anzai, Bastien Chopard, Makoto Ohta
A Development of Manufactureoriented Optimization Strategy for Flow Diverter Stent based on Cylindrical Spirals
[11th International Conference on Flow Dynamics (ICFD2014), Sendai, Oct. 8-10, 2014]
PDF
Makoto Ohta, Sho Matsumoto, Xiabo Han, Batien Chopard, Mingzi Zhang, Yujie Li, Yuuki Yoshida, Hitomi Anzai
Development of a Program for Blood flow and Cell Behaviors Based on LBM Method (Second report)
[The Fourteenth International Symposium on. Advanced Fluid Information.,Sendai, Japan, Oct. 8, 2014]
PDF
Makoto Ohta, Wataru Sakuma, Yuta Muramoto, Hitomi Anzai, Toshio Nakayama
Modeling of Cortical Bone and Bone Marrow
[11th International Conference on Flow Dynamics (ICFD2014), Sendai, Oct. 8-10, 2014]
PDF
Makoto Ohta, Kei Ozawa, Vincent Fridrici, Kaihong Yu, Philippe Kapsa
Research of Friction and Drilling on Bio-composite Model (Second report)
[The Fourteenth International Symposium on. Advanced Fluid Information.,Sendai, Japan, Oct. 8, 2014]
PDF
Makoto Ohta
Tohoku-Lyon collaboration, past and future
[France-Japan research collaboration seminar(5th SciVal user conference), Japan, Jan. 21, 2015]
PDF
Makoto Ohta, Guy courbebaisse, Hitomi Anzai, Mingzi Zhang, Bastien Chopard, Yue zhang
Optimization of endovascular prosthesis for the treatment ofcerebral aneurysms
[2015 ELyT lab Workshop,Feb18-21, 2015,Matsushima, Japan]
PDF
Kaihong Yu, Vincent Fridrici, Philippe Kapsa, Makoto Ohta
The Effect of Vibration Ablation Catheter on the Temperature of the Electrode under 30 gf
[2015 ELyT lab Workshop,Feb18-21, 2015,Matsushima, Japan]
PDF
Mingzi Zhang, Makoto Ohta
Introduction of Three Strut Optimization Strategies towards the Design of Efficient Flow-Diverter Stents
[2015 ELyT lab Workshop,Feb18-21, 2015,Matsushima, Japan]
PDF
Yujie Li, Yoneyama Yuuya, Haruo Isada, Takahumi Kosugi, Takashi Kosugi, Makoto Ohta
Comparison of intra-aneurysmal velocity magnitude in a patient-specific model among PIV, CFD and MRI
[2015 ELyT lab Workshop,Feb18-21, 2015,Matsushima, Japan]
PDF
Wataru Sakuma, Hitomi Anzai, Toshio Nakayama, Makoto Ohta
Flow in cancellous bone
[2015 ELyT lab Workshop,Feb18-21, 2015,Matsushima, Japan]
PDF
Yuta Muramoto, Gaëtan Bouvard, Vincent Fridrici, Philippe Kapsa, Makoto Ohta
Production and characterization of composite materials for bones-biomodeling
[2015 ELyT lab Workshop,Feb18-21, 2015,Matsushima, Japan]
PDF
安西眸，Bastien Chopard，中山敏男，張明子，吉田裕貴，太田信
脳動脈瘤治療用ステントにおける数値解析を用いた最適設計
[第19回計算工学講演会，6月11-13日，広島国際会議場，広島]
PDF
佐久間航，太田信，中山敏男，中村修二，佐渡克行，高川浩和
穿刺針周りの骨髄液流れの数値モデル化
[第19回計算工学講演会，6月11-13日，広島国際会議場，広島]
PDF
松本 翔，韓 笑波，小林 尚俊， 太田 信
せん断応力環境下においてNiTiワイヤの表面加工が内皮化に与える影響
[日本機械学会2014年度年次大会，9月7-10日，東京]
PDF
太田 信，久世 政範
コイルモデルを用いたPIVによる瘤内血流解析
[日本流体力学会年会2014，9月15-17日，仙台]
PDF
安西 眸，太田 信
数値流体力学に基づくステントストラット配置最適化
[日本流体力学会年会2014，9月15-17日，仙台]
PDF
佐久間 航，中山 敏男，安西 眸，中村 修二，佐渡 克行，高川 浩和，太田 信
実形状海綿骨内の数値流体力学解析
[日本機械学会第27回計算力学講演会，11月22-24日，岩手]
PDF
木下 知，松本 翔
選択的静脈採血のための新しいカテーテルの開発
[COMSOL Conference Tokyo 2014 Information，12月5日，東京]
PDF
吉田 裕貴，安西 眸，太田 信
脳動脈瘤内の血液凝固促進を目指したステントデザインの最適化
[日本機械学会第11回最適化シンポジウム2014，12月12-13日，東京]
PDF1
PDF2
李 玉潔, 米山 祐也, 磯田 治夫, 小杉 崇文, 小杉 隆司, 太田 信
PIV, CFD, およびMRIにおける動脈瘤内流れ分布の比較
[日本機械学会第27回バイオエンジニアリング講演会，2015年1月9-10日，新潟]
PDF
H. Anzai
Analysys of optimized design of stent
[Interdisciplinary Cerebrovascular Symposium, June 2-4, 2014, Zurich, Switzerland]
Makoto Ohta, Hitomi Anzai, Mingzi Zhang, Yujie Li, Xiaobo Han, Kaihong Yu, Toshio Nakayama
The concept of Bundle of Inflow (BOI) for reducing flow in aneurysm
[7th World Congress of Biomechanics (WCB2014), Boston, Massachusetts, July 6-11, 2014]
PDF
Wataru Sakuma, Toshio Nakayama, Hitomi Anzai, Makoto Ohta
A Comparison of Experimental and CFD Analyses for Permeability of Cancellous Bone
[1st International symposium for collaborative research between Tohoku University and Technische Universität Braunschweig, Germany, Nov. 11, 2014]
PDF
Hitomi Anzai, Yuuki Yoshida, Mingzi Zhang, Makoto Ohta
Automation of design optimization for intracranial stent
[1st International symposium for collaborative research between Tohoku University and Technische Universität Braunschweig, Germany, Nov. 11, 2014]
PDF
Makoto Ohta
Introduction of invitro and insilico analyses for medical equipment
[1st International symposium for collaborative research between Tohoku University and Technische Universität Braunschweig, Germany, Nov. 11, 2014]
PDF
Makoto Ohta
In-vitro and In-silico analyses/Developments for medical equipment
[Tohoku – Syracuse Bilateral Net-symposium, Nov. 19, 2014]
PDF
Makoto Ohta
Invited speaker
[Lyon,France]
Makoto Ohta
Design Optimization for Intracranial stent
[東北大学 加齢医学研究所, 2014年4月15日]
流体科学研究所 太田・早瀬・白井・船本研究室
見る!触る!知る!医工学の魅力
[第66回東北大学祭, 2014年10月31日]
PDF
Yujie Li
Numerical Simulation and Experimental Study of Flow Pattern in Cerebral Artery with Aneurysm
[Presentation at Linné FLOW Centre & Wallenberg Wood Science Center , Oct 2, 2014, KTH, Stockholm, Sweden]
于 凱鴻，太田 信
アブレーションカテーテル評価
[東北大学―信州大学共催シンポジウム2014，10月14-15日, 信州大学線維学部]
PDF