2015
Original papers published in scholarly journals and academic journalsFutoshi MORI, Sho HANIDA, Makoto OHTA, Teruo MATSUZAWA
Changes in Blood Flow due to Stented Parent Artery Expansion in an Intracranial Aneurysm
[Technology and Health Care,Volume23, pp. 9-21, 2015.]
PDF
H. Anzai, Y. Yoshida, S. Sugiyama, H. Endo, Y. Matsumoto, M. Ohta
Porosity Dependency of an Optimized Stent Design for Intracranial Aneurysm
[Technology and Health Care, Volume23, no. 5, pp. 547-556, 2015.]
PDF
Chang-Ho Yu, Tae-Kyu Kwon, Chan Hee Park, Makoto Ohta and Sung Hoon Kim
Comparative analysis for evaluating the traceability of interventional devices using blood vessel phantom models made of PVA-H or silicone
[Technology and Health Care,Volume23, no. s2, pp. S301-S310, 2015.]
PDF
Yasutomo Shimizu and Makoto Ohta
Influence of plaque stiffness on deformation and blood flow patterns in models of stenosis
[Biorheology, vol. 52, no. 3, pp. 171-182, 2015]
PDF
Lijian Xu, Michiko Sugawara, Gaku Tanaka, Makoto Ohta, Hao Liu and Ryuhei Yamaguchi
Effect of elasticity on wall shear stress inside cerebral aneurysm at anterior cerebral artery
[Technology and Health care, 2015, accepted.]
Mingzi Zhang, Hitomi Anzai, Bastien Chopard, Makoto Ohta
Manufacture-Oriented Design Optimization for a Flow Diverter Stent Using Lattice Boltzmann Method and Simulated Annealing
[Advances in Structural and Multidisciplinary Optimization - Proceedings of the 11th World Congress of Structural
and Multidisciplinary Optimization (WCSMO-11),Edited by Qing Li, Grant P Steven, Zhongpu (Leo) Zhang, pp. 310-315, 2015]
PDF
Makoto Ohta, Hitomi Anzai, Yukihisa Miura and Toshio Nakayama
Parametric study of porous media as substitutes for flow-diverter stent
[Biomaterials and Biomedical Engineering, vol. 2, no. 2, pp. 111-125, 2015]
PDF
Yuta Muramoto, Makoto Ohta, Vincent Fridrici, Philippe Kapsa, Gaëtan Bouvard
Mechanical properties for drilling bone biomodel
[27ème Jornées Internationals Francophones de Tribologie (JIFT2015), May 27-29, 2015, Nantes, France]
PDF
Mingzi Zhang, Hitomi Anzai, Bastien Chopard, Makoto Ohta
Manufacture-Oriented Design Optimization for a Flow Diverter Stent Using Lattice Boltzmann Method and Simulated Annealing
[11th World Congress of Structural and Multidisciplinary Optimization (WCSMO-11), June 7-12, 2015, Sydney, Australia]
PDF
Mingzi Zhang, Hitomi Anzai, Makoto Ohta
Introduction of Optimization of Design using Combination of Lattice Boltzmann Method as CFD and Simulated Annealing for Reduction of Flow Speed
[1st NUAA-Tohoku University Joint Symposium on Fluid Science, Aerospace Engineering and Smart Structure Technology, June 21-22, 2015, NUAA, Nanjing, China]
PDF
Wataru Sakuma, Toshio Nakayama, Hitomi Anzai, Shuji Nakamura, Katsuyuki Sado, Konstantin Kutscher, Martin Geier, Manfred Krafczyk, Makoto Ohta
CFD Alanyses for the flow in Cancellous Bone with LBM
[The 8th Asian-Pacific Conference on Biomechanics, Sept.16-19, 2015, Sapporo, Japan]
PDF
Kaihong Yu, Tetsui Yamashita, Shigeaki Shingyochi, Kazuo Matsumoto, Makoto Ohta
Lesion Size Comparison of Catheter Ablation between Open Irrigation and Vibration under No Flow Condition
[Eighth Asian-Pacific Conference on Biomechanics, 16-19 September 2015, Sapporo, Japan]
PDF
Yuta Muramoto, Makoto Ohta, Philippe Kapsa, Vincent Fridrici and Gaëtan Bouvard
Study of mechanical properties of acrylic composite for drilling bone biomodel
[International Tribology Conference, Tokyo 2015, 16th-20th September, 2015, Tokyo, Japan]
PDF
Tomohito Watanabe, Han Xiaobo, Makoto Ohta,Hitomi Anzai, Hisatoshi Kobayashi
Cell density distribution around the wire with flow condition (P314-415, OS4-8)
[The Fifteenth International Symposium on Advanced Fluid Information., Oct. 27-29, 2015, Sendai, Japan]
PDF
Tomo Kinoshita, Kazumasa Seiji, Kei Takase, Tomohito Watanabe, Sho Matsumoto, Makoto Ohta
Development of a New Catheter with Innovative Concepts for Selective Venous Sampling - Preliminary CFD Study
[The Fifteenth International Symposium on Advanced Fluid Information., Oct. 27-29, 2015, Sendai, Japan]
PDF
Makoto Ohta, Yuta Muramoto, Vincent Fridrici, Kaihong Yu, Philippe Kapsa
Research of Friction and Drilling on Bio-composite Model (third report)
[AFI-TFI, Oct. 27-29, 2015, Sendai, Japan]
PDF
Makoto Ohta, Mingzi, Zhang, Bastien Chopard, Xiaobo Han, Yujie Li, Hitomi Anzai
Development of a Program for Blood flow and Cell Behaviors Based on LBM Method (third report)
[AFI-TFI, Oct. 27-29, 2015, Sendai, Japan]
PDF
Zhang M, Anzai H, Ohta M
Visualization of Flow Patterns through the Aneurysmal Orifice after Flow Diverter Optimizations with Different Objective Functions
[Interdisciplinary Cerebrovascular Symposium (Intracranial Stent Meeting 2015), Nov. 13-14, 2015, Gold Coast, Australia]
PDF
Li Y, Yoneyama Y, Isoda H, Kosugi T, Kosugi T, Ohta M
Comparison Between CFD and MRI with 2D Velocity Vector Field and 3D Streamline in the Cerebral Aneurysm
[Interdisciplinary Cerebrovascular Symposium (Intracranial Stent Meeting 2015), Nov. 13-14, 2015, Gold Coast, Australia]
PDF
Tomo Kinoshita, Kazumasa Seiji, Kei Takase, Tomohito Watanabe, Sho Matsumoto, Makoto Ohta
Development of a new catheter for selective venous sampling- a new, advanced study with improved model
[ECR, 2016]
安西眸, 下權谷祐児, 太田信
CFDで何をみるのか,見えるのか AVEC CFD 2015 Analysis and Visualization Exhibition of Cerebral aneurysms using CFD
[第38回日本バイオレオロジー学会年会,6月6-7日, 学術総合センター, 東京]
PDF
安西眸,吉田裕貴,下山幸治,大林茂,太田信
脳動脈瘤治療用ステントにおける自己組織化マップを用いた最適形状解析
[日本機械学会2015年度年次大会, 9月13-16日, 北海道大学, 札幌]
PDF
張明子,安西眸,太田信
平均および最大流速の最適脳動脈瘤用ステントデザイン Optimized Intracranial Stent Designs with Average and Maximum Velocities
[流体力学会年会2015,東京工業大学,9月26日, 東京]
Xiaobo HAN, 坂元 尚哉, 冨田 典子, Meng Hui, 佐藤 正明, 太田 信
せん断応力を負荷した内皮細胞の TGF-β1 が共存培養モデル内平滑筋細胞の形質に与える影響
[第28回バイオエンジニアリング講演会, 1月9-10日, 東京工業大学, 東京]
PDF
大西 泰平,Li Yujie,乙幡 周作,出井 正,太田 信
ステントグラフトのエンドリークおよびマイグレーション評価用 in-vitro モデルの開発
[第28回バイオエンジニアリング講演会, 1月9-10日, 東京工業大学, 東京]
PDF
渡邉 和浩,安西 眸,太田 信
動脈瘤ネックの流入領域に対するストラットの相対位置が瘤内流れに与える影響
[第28回バイオエンジニアリング講演会, 1月9-10日, 東京工業大学, 東京]
PDF
高橋 廉,于 凱鴻,太田 信
カテーテルアブレーション評価に用いる血液の粘度を考慮した作動流体の開発
[日本機械学会東北支部 第51期総会・講演会, 3月11日, 東北大学, 仙台]
PDF
金子 直樹,益子 敏弘,大西 泰平,太田 信,渡辺 英寿
血管モデル作製のためのABS樹脂平滑化法の検討
[第31回NPO法人日本脳神経血管内治療学会学術総会, 11月19-21日, 岡山]
PDF
Yujie Li
Comparison of the velocity vector field in a cerebral aneurysm with different methods of PIV,CFD and MRI
[June 23, 2015, Beijing University of Technology, Beijing, China]
Makoto Ohta
Design analysis using optimization
[June 23, 2015, Beijing University of Technology, Beijing, China]
Makoto Ohta, Sho Matsumoto, Xiaobo Han, Hisatoshi Kobayashi
Surface treatment on wire for increasing endothelialization
[9th European Solid Mechanics Conference, July 6-10, 2015, Madrid, Spain]
PDF
Hitomi Anzai, Yuuki Yoshida, Mingzi Zhang, Makoto Ohta
Searching for valuable hemodynamic parameters for applying to optimization study
[9th European Solid Mechanics Conference, July 6-10, 2015, Madrid, Spain]
PDF
Anzai H, Yoshida Y, Shimoyama K, Obayashi S, Ohta M
Analysis of Relationship Between Stent Structure and Flow Stagnation Using Self-Organizing Maps for Realistic Aneurysm
[Interdisciplinary Cerebrovascular Symposium (Intracranial Stent Meeting 2015), Nov. 13-14, 2015, Gold Coast, Australia]
PDF
Nakayama T, Ohta M
The Parent Artery Configuration can Induce Flow Pattern and its Stent Pattern?
[Interdisciplinary Cerebrovascular Symposium (Intracranial Stent Meeting 2015), Nov. 13-14, 2015, Gold Coast, Australia]
PDF
Ohta M, Matsumoto S, Watanabe T, Han XB, Kobayashi H
In-Vitro Model with Flow for Surface Treatment for Endothelialization
[Interdisciplinary Cerebrovascular Symposium (Intracranial Stent Meeting 2015), Nov. 13-14, 2015, Gold Coast, Australia]
PDF
Makoto Ohta
Biofluid Control
[Proceedings of 2nd Biomedical Symposium and 1st Biomedical Engineering Symposium, Nov. 16, 2015, Sydney, Australia]
Makoto Ohta
非侵襲血圧計測機器開発のための血管モデル
[ウェアラブルバイタルサイン測定システム開発プロジェクト特別講演会, Dec. 7, 2015, 信州大学京]
太田 信
血流から考える脳動脈瘤用最適化ステントの開発
[第 9 回 CVC 千葉血管障害の原点を考える会, Nov. 5, 2015, 千葉市]
PDF
太田 信
血管モデルおよびステントの開発
[医工連携セミナー(先端医用機器開発), Mar. 17, 2016, 弘前大学, 青森]
PDF
太田 信,于 凱鴻,山下 哲以,新行内 成晃,松本万夫
振動によるアブレーションカテーテルの冷却効果
[第28回バイオエンジニアリング講演会 機械学会—循環器学会ジョイントシンポジウム, 1月9-10日, 東京工業大学, 東京]
PDF
Yujie Li, Makoto Ohta
Comparison of the velocity vector field under different boundary conditions in a complex geometry with different experimental methods and numerical simulation
[China-Japan Joint Workshop on Flow Dynamics and Transport Phenomena, June 24, 2015, Tsinghua University, Beijing, China]
PDF
Makoto OHTA, Vincent FRIDRICI and Philippe KAPSA
Material and Surface Design for Medical Application
[JSPS Core-to-core program, International research core on smart layered materials and structures for energy saving January 20-21, 2016, Maison Villemanzy in Lyon, France]
PDF
Hitomi Anzai, Kazuhiro Watanabe, Yuuki Yoshida, Koji Shimoyama, Shigeru Obayashi, Makoto Ohta
Co-relationship between Hemodynamics and Optimal Stent Structure
[Proceedings of 2nd Biomedical Symposium and 1st Biomedical Engineering Symposium, Nov. 16, 2015, Sydney, Australia]
PDF
Mingzi Zhang, Hitomi Anzai, Bastien Chopard, Makoto Ohta
Towards the Patient-specific Design of Intracranial Stents for Advanced Flow Diversion Efficacy
[Proceedings of 2nd Biomedical Symposium and 1st Biomedical Engineering Symposium, Nov. 16, 2015, Sydney, Australia]
PDF
Makoto Ohta, Tomohito Watanabe, Xiaobo Han, Kaihong Yu, Taihei Onishi, Hitomi Anzai
In-Vitro Model and Cell Behaviors
[Proceedings of 2nd Biomedical Symposium and 1st Biomedical Engineering Symposium, Nov. 16, 2015, Sydney, Australia]
PDF
Yujie Li, Makoto Ohta
Hemodynamics Study with In-Vitro Aneurysm Phantom
[Proceedings of 2nd Biomedical Symposium and 1st Biomedical Engineering Symposium, Nov. 16, 2015, Sydney, Australia]
PDF
Makoto Ohta
Introduction to Graduate School of Engineering (GSE) at Tohoku University
[Proceedings of 2nd Biomedical Symposium and 1st Biomedical Engineering Symposium, Nov. 16, 2015, Sydney, Australia]
Kaihong Yu, Makoto Ohta
Development of Evaluation System for Cardiac Ablation Catheter on Electrode Cooling and Tissue Temperature
[International Workshop on Flow Dynamics and Spintronics, November 12-13, 2015, Royal Institute of Technology, Stockholm, Sweden]
PDF
Makoto Ohta, Kaihong Yu, Ren Takahashi, Yuta Muramoto, Wataru Sakuma, Taihei Onishi, Hitomi Anzai
Development of in-vitro and in-silico model for evaluating medical devices
[Beijing-Tohoku Biomechanics Symposium, November 25, 2015, Beijing University of Technology, Beijing, China]
PDF
Makoto Ito, Mingzi Zhang, Hitomi Anzai, Makoto Ohta
Optimization of Flow Diverter design
[Beijing-Tohoku Biomechanics Symposium, November 25, 2015, Beijing University of Technology, Beijing, China]
PDF
Y. Muramoto, V. Fridrici, Ph. Kapsa, G. Bouvard, F. Lundell, M. Ohta
Comparsion of Drilling Behavior of Acrylic Materials Measured by Tribometer
[Beijing-Tohoku Biomechanics Symposium, November 25, 2015, Beijing University of Technology, Beijing, China]
PDF
菅 幹生
MRエラストグラフィによる生体組織粘弾性イメージングシステムの開発
[第16回 流体科学におけるバイオ・医療に関する講演会, 2015年10月1日, 東北大学流体科学研究所]
PDF
Minzi Zhang
Best Student Presentation Award (Intracranial Stent Meeting 2015 (Gold Coast, Australia))
[Visualization of Flow Patterns through the Aneurysmal Orifice after Flow Diverter Optimizations with Different Objective Functions]
PDF
Yujie Li
Best Student Presentation Award (Intracranial Stent Meeting 2015 (Gold Coast, Australia))
[Comparison Between CFD and MRI with 2D Velocity Vector Field and 3D Streamline in the Cerebral Aneurysm]
PDF